Building Construction — Yuma, Arizona
WD AZ20260042-16209-bld · Revision 1 · Effective May 17, 2026
The Davis-Bacon prevailing wage for BRICKLAYER in Yuma, Arizona (construction type: building) is $32.29/hr base + $9.97/hr fringe = $42.26/hr total package (WD AZ20260042-16209-bld, Rev. 1).
Scroll down for all 21 trade classifications covered by this determination.
Prevailing Wage Rates — All Trades
Base hourly rates and fringe benefit requirements for all trade classifications covered by this wage determination. Total package = base + fringe.
| Trade Classification | Base $/hr | Fringe $/hr | Total Package | H&W | Pension | Vacation | Training |
|---|---|---|---|---|---|---|---|
| BRICKLAYER | $32.29 | $9.97 | $42.26 +48% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| CARPENTER | $33.19 | $19.20 | $52.39 +100% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| CEMENT MASON/CONCRETE FINISHER | $21.00 | $0.00 | $21.00 -24% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| DRYWALL FINISHER/TAPER | $22.47 | $0.00 | $22.47 Above median -3% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| ELECTRICIAN | $33.00 | $13.04 | $46.04 +61% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| ELECTRICIAN | $26.16 | $9.91 | $36.07 +26% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| IRONWORKER, REINFORCING | $22.04 | $0.00 | $22.04 -24% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| IRONWORKER, STRUCTURAL | $33.00 | $19.91 | $52.91 Above median +83% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| LABORER: COMMON OR GENERAL | $15.96 | $0.00 | $15.96 Above median -28% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| LABORER: MASON TENDER - CEMENT/CONCRETE | $19.79 | $0.00 | $19.79 Above median -11% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| LABORER: PIPELAYER | $16.77 | $1.05 | $17.82 Above median -20% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| OPERATOR: BACKHOE/EXCAVATOR/TRACKHOE | $19.58 | $3.79 | $23.37 Above median | $0.00 | $0.00 | $0.00 | $0.00 |
| OPERATOR: LOADER | $15.00 | $4.15 | $19.15 Above median | $0.00 | $0.00 | $0.00 | $0.00 |
| OPERATOR: ROLLER | $23.62 | $6.44 | $30.06 Above median | $0.00 | $0.00 | $0.00 | $0.00 |
| PAINTER | $15.00 | $0.00 | $15.00 -34% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| PIPEFITTER | $51.15 | $21.00 | $72.15 Above median +142% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| PLUMBER | $28.51 | $0.00 | $28.51 -4% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| POWER EQUIPMENT OPERATOR: BULLDOZER | $31.69 | $13.52 | $45.21 Above median +57% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| POWER EQUIPMENT OPERATOR: CRANE | $36.04 | $13.52 | $49.56 +72% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| SHEET METAL WORKER | $49.39 | $19.86 | $69.25 Above median +180% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
| TILE SETTER | $21.50 | $0.00 | $21.50 -7% vs market | $0.00 | $0.00 | $0.00 | $0.00 |
Crew Labor Cost Estimator
Estimate total federal-contract labor cost using the Yuma, AZ — Building construction prevailing wage rates. Add a row for each trade in your crew, set the number of workers and hours, and optionally add a burden percentage for payroll taxes, workers’ comp, and insurance.
| Trade | Workers | Hours/worker | Rate $/hr | Subtotal |
|---|
This is an estimate only. Burden percentages vary widely by state, employer experience modifier, and benefit plan structure. Davis-Bacon also requires per-trade record-keeping on Form WH-347; this calculator does not replace certified payroll reporting.
Other Construction Types in Yuma
Compliance Notes
- This wage determination applies to federal contracts for building construction in Yuma, Arizona.
- The Davis-Bacon Act applies to contracts ≥$2,000 involving construction, alteration, or repair of federal or federally assisted buildings.
- The total package (base + fringe) is the minimum hourly labor cost per worker. Employers may satisfy fringe requirements by contributing to bona fide benefit plans.
- Apprentices must be registered with a DOL-approved apprenticeship program to be paid apprentice rates.
- Contractors must post this wage determination at the job site. Certified payroll records must be submitted weekly using Form WH-347.
- If a trade classification you need isn't listed below, request a conformance from the DOL Wage and Hour Division.